Using The Graphic Equalizer - Shure DFR11EQ User Manual

Using the Graphic Equalizer

Adjusting Bands
keyboard selects the sliders from left to right. When the desired slider is selected, use the
keys to adjust the level by 0.5 dB increments. Us the [Page Up] and [Page Down] keys to
adjust the level by 3 dB increments.
Low-Frequency Roll-Off
The Low frequency roll-off slider determines the corner frequency of the highpass filter.
To adjust the Low frequency roll-off, click and drag the slider to the desired frequency. You
can also use the
High-Frequency Roll-Off
The High frequency roll-off slider determines the corner frequency of the lowpass filter.
To adjust the High frequency roll-off, click and drag the slider to the desired frequency. You
can also use the
Flat Button
The Flat button resets all the sliders, bringing them back to the 0 dB position.
The DFR11EQ graphic equalizer looks and functions just like a
conventional graphic equalizer. Each slider controls a
centered around the frequency indicated above each slider. When a slider
is selected, the center of the slider turns green.
There are two ways to adjust the sliders:
Using the mouse pointer ... drag and drop the slider to the desired level.
Or you can point and click on the band, which will adjust the level up or down
in 3 dB increments.
Using the computer keyboard... pressing the [Tab] on the computer
and keys on the computer keyboard to move this slider.
and keys on the computer keyboard to move this slider.
14
Main Menu
1
/ -octave band
3