Silicon Imaging SI-2K User Manual page 32

How to de-activate or re-activate SiliconDVR
Note:
Please note, that you only have limited number of activations, you can activate
your SiliconDVR three times. For re-use please take care to properly deacti-
vate your system. We strongly recomend to contact our technical support team
before de-activating or re-activating your license.
Please email to helpdesk@pstechnik.de
What shall I do if SiliconDVR is not activated
You need a separate internet connection line. Do setup an internet connection
on your SI-2K Recording System with Silicon DVR Software installed to pre-
vent misuse or Virus Attacks. (Recording Unit or Laptop/Workstation).
If you would like to deactivate or reactivate licenses on the SI-2K Recording
Unit follow these steps:
1) Run ActivateRaw.exe
C:\Program Files\ CineForm\CineformRAW-2K-Codec\ActivateRaw.exe
2) If activated the pop up window shows Name, Serial Number, Activation
Key, System Code. The System Code is generated randomly and automatical-
ly on your system at that time. These are unique fingerprints of your hardware
system
3) If not activated, please go to http://www.cineform.com/register.html and
follow the instructions. Make sure you correctly type your email address, as
the activation code is sent to you via email. Iif you consider to use our support
and helpdesk, please always carboncopy or forward activation code with your
product serial to helpdesk@pstechnik.de
4) Remember exact User Name given carefully since it is case and letter
sensitive
5) Transfer emailed Activation Code and User Name into the popup window
textfields and press activate.
Please note
that you only have limited number of activations. For re-use please take care to
properly deactivate your system.
Only exception to connect your recording system to the internet it to reach the
activation server for deactivation of your license! We recomend to contact our
technical support team before deactivating your license - helpdesk@pstechnik.de

SiliconDVRSoftware
 SI 2K Manual