Silicondvr Software; Chapter  4 Silicondvr Software; Software Activation And Licensing - Silicon Imaging SI-2K User Manual

SiliconDVR Software

Software Activation and Licensing

There are two levels of software activation required for a fully operational work-
flow:
1) the CineForm RAW encoder that works in conjunction with the SI-2K DVR
application to encode the video stream, and the CineForm editing tools for
your editing suite.
Silicon DVR is the Control Center for Recording and Camera Setup. A re-
quirement to run Silicon DVR on the Camera or on a separate Workstation is
the License and the Activation.
If you have purchased a Recording Unit by P+S Technik, the embedded Sili-
conDVR runs an activation personally licensed to you.
It should already be activated ! Do NOT deactivate by yourself.
If the license does not run on your device, please contact helpdesk@pstech-
nik.de.
SiliconDVR is shipped with a Cineform Serial Number with a limited number
of activations ( 3 Activations): CFR2K-XXXXXXXXXX .
Activation is the important step to a working license and needs Serial Number
and the System Code and a Name for referring the Activation.
This kind of activation is valid for Silicon DVR Version 1.571 and lower Ver-
sions.
Cineform Activation is needed to run SiliconDVR Application.
If SiliconDVR is not activated
You need a separate Internet Connection Line. Do not use Internet Connec-
tion on your Recording System with Silicon DVR Software installed to prevent
misuse or virus attacks (Recording Unit or laptop/workstation). If you would
like to deactivate or reactivate Licenses on the Recording Unit
SI 2K Manual
SiliconDVRSoftware
4
1