Mosfet/ic technology car audio amplifier (8 pages)
Summary of Contents for Audiopipe 1200W
Page 2
Congratulations! Thank you for purchasing this Audiopipe amplifier for your car audio system. Now you own an amplifier of uncompromising design and engineering incorporating the latest advanced circuit technology. You will discover soon that our amplifiers display optimum sound with high quality and provide reliable performance.
Page 3
English APSM-2125 1. RCA Input Jacks 3. Right Speaker Output 2. Left Speaker Output 1. Ground 4. 30 Amp Fuse 2. Remote Turn-on Input 5. Protection Circuit Indicator LED 3. Battery +12V Input 6. Power Indicator LED 1. GAIN Control 4.
Page 4
English APSM-4080 1. RCA Input Jacks 3. Front Speaker Output 2. Rear Speaker Output 1. Ground 4. 40 Amp Fuse 2. Remote Turn-on Input 5. Protection Circuit Indicator LED 3. Battery +12V Input 6. Power Indicator LED 1. Front GAIN Control 6.
Page 5
English We recommend you have the installation done by Authorized Audiopip dealer. The ground wire should be connected directly with the chasis of your vehicle which should be a metal to metal ground point connection. The amplifier must be mounted securely at a solid, dry and low vibration surface in the trunk or passenger area.
Page 7
English APSM-2125 Bridged-Mono Subwoofer System GAIN FLAT 50Hz 1.2KHz - 6 -...
Page 8
English APSM-2125 2-Channel Full-Range Satellite, or Subwoofer FLAT System GAIN FLAT 50Hz 1.2KHz GAIN FLAT 50Hz 1.2KHz GAIN FLAT 50Hz 1.2KHz - 7 -...
Page 9
English APSM-4080 4-Channel Full-Range Operation - 8 -...
Page 10
English APSM-4080 Bridged-Mono Subwoofer System FLAT 50Hz 1.2KHz FLAT 50Hz 1.2KHz - 9 -...
Page 11
English APSM-4080 2-Channel Full-Range Satellite, or Subwoofer FLAT System FLAT 50Hz 1.2KHz FLAT 50Hz 1.2KHz - 10 -...
Page 12
English APSM-4080 2-Channel Full-Range Satellite, or Subwoofer FLAT System FLAT 50Hz 1.2KHz FLAT 50Hz 1.2KHz - 11 -...
Page 13
English • • • • • • • • • • • • • For additional questions please contact your authorized Audiopipe dealer. - 12 -...
Page 14
English APSM-2125 RMS @ 4 Ohms (<1% DISTORTION) ........2 x 125W RMS @ 2 Ohms (<1% DISTORTION) ........2 x 200W Maximun Power Output ............1 x 400W Frequency Response ............... 10 ~ 30kHz Signal Noise Ratio ..............>80dB THD ..................
Need help?
Do you have a question about the 1200W and is the answer not in the manual?
Questions and answers