Related Manuals for Audiopipe APSM-2125
Summary of Contents for Audiopipe APSM-2125
- Page 2 APSM-2125 1. RCA Input Jacks 3. Right Speaker Output 2. Left Speaker Output 1. Ground 4. 30 Amp Fuse 2. Remote Turn-on Input 5. Protection Circuit Indicator LED 3. Battery +12V Input 6. Power Indicator LED 1. GAIN Control 4. Bass Boost Level 2.
- Page 3 APSM-4080 1. RCA Input Jacks 3. Front Speaker Output 2. Rear Speaker Output 1. Ground 4. 40 Amp Fuse 2. Remote Turn-on Input 5. Protection Circuit Indicator LED 3. Battery +12V Input 6. Power Indicator LED 1. Front GAIN Control 6.
- Page 4 We recommend you have the installation done by Authorized Audiopip dealer. The ground wire should be connected directly with the chasis of your vehicle which should be a metal to metal ground point connection. The amplifier must be mounted securely at a solid, dry and low vibration surface in the trunk or passenger area.
- Page 5 APSM-2125 2- Channel Full-Range Operation...
- Page 6 APSM-2125 Bridged-Mono Subwoofer System GAIN FLAT 50Hz 1.2KHz...
- Page 7 APSM-2125 2-Channel Full-Range Satellite, or Subwoofer FLAT System GAIN FLAT 50Hz 1.2KHz GAIN FLAT 50Hz 1.2KHz GAIN FLAT 50Hz 1.2KHz...
- Page 8 APSM-4080 4-Channel Full-Range Operation...
- Page 9 APSM-4080 Bridged-Mono Subwoofer System FLAT 50Hz 1.2KHz FLAT 50Hz 1.2KHz...
- Page 10 APSM-4080 2-Channel Full-Range Satellite, or Subwoofer FLAT System FLAT 50Hz 1.2KHz FLAT 50Hz 1.2KHz...
- Page 11 APSM-4080 2-Channel Full-Range Satellite, or Subwoofer FLAT System FLAT 50Hz 1.2KHz FLAT 50Hz 1.2KHz...
- Page 12 • • • • • • • • • • • • • For additional questions please contact your authorized Audiopipe dealer.
- Page 13 APSM-2125 RMS @ 4 Ohms (<1% DISTORTION) ........2 x 125W RMS @ 2 Ohms (<1% DISTORTION) ........2 x 200W Maximun Power Output ............1 x 400W Frequency Response ............... 10 ~ 30kHz Signal Noise Ratio ..............>80dB THD ..................