Initial Setup - Kenwood DDX6036 Instruction Manual

Initial Setup

When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.

Initial Setup

1 Turns the power On
2 Set each item
[Language] Select the language used for
the control screen and setting items. See
<Language Setting> (page 58).
[Angle] You can adjust the position of the
monitor. See <Monitor Angle Control> (page
60).
[iPod AV Interface Use] Sets the terminal
which iPod is connected. (
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display. (
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
[Color] Sets the screen and button illumination
color. See <Panel Color Coordinate> (page 63).
80 DDX6036/DDX6036M
3
⁄
•
"iPod")
"OFF")
End initial setup
The settings above can be changed in
(page 56).
<Setup Menu>