Replacing The Printhead - Kodak HERO 2.2 Extended User Manual

7. Insert the ink cartridge into the printhead.
8. Press down on the ink cartridge tab until you hear a click.
9. Close the access door.

Replacing the printhead

Replacing the printhead is not a regular maintenance procedure. Replace the printhead only if you receive a new
:
printhead from Kodak.
Click to view a video that demonstrates replacing the printhead.
To replace the printhead:
1. Make sure the printer is on.
2. Lift the access door, and wait for the carriage to move to the access position.
www.kodak.com/go/aiosupport
KODAK HERO 2.2 All-in-One Printer
73