Adding A Wireless Network Connection To A Usb-Connected Computer; Changing From Usb To A Wireless Connection - Kodak HERO 2.2 Extended User Manual

Networking Your Printer
1. Select Apple > System Preferences.
2. Under Hardware, select Print & Fax (for MAC OS 10.5 and 10.6) or Print & Scan (for MAC OS 10.7).
3. Click + in the dialog box.
4. For MAC OS 10.5 and 10.6: select your printer from the list, then click Add.

Adding a wireless network connection to a USB-connected computer

You can change the way you connect to your printer at any time.

Changing from USB to a wireless connection

To change the printer connection type from USB to a wireless (Wi-Fi) network:
If your printer is connected to a computer with WINDOWS OS:
1. Disconnect the USB cable from your printer and computer.
2. On your computer, disable any firewall you have installed until you have successfully completed the installation.
3. If you have not already done so, connect your printer to your wireless network. See
network, 5.
4. Select Start > All Programs > Kodak > KODAK Printer Set-Up Utility.
If your wireless all-in-one printer (example: KodakHERO2.2+xxxx) is not listed:
a. Select No, my printer is not listed, then click Next.
b. Select your printer from the list.
c. Select Network - Wireless/Wi-Fi, then click Next. When your printer is detected, driver installation begins.
d. When driver installation is complete, click Done.
If your wireless all-in-one printer (example: KodakHERO2.2+xxxx) is listed:
a. Select the all-in-one printer that is connected to your network.
b. Select Yes, my printer is listed, then click Next.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2
+xxxx).
If your printer is connected to a computer with MAC OS:
1. Disconnect the USB cable from your printer and computer.
2. If you have not already done so, connect your printer to your wireless network. See
network, 5.
3. Select Apple > System Preferences.
4. Under Hardware, select Print & Fax (for MAC OS 10.5 and 10.6) or Print & Scan (for MAC OS 10.7).
5. Click + in the dialog box.
6. For MAC OS 10.5 and 10.6: select your printer from the list, then click Add.
The printer with a wireless connection is listed as the name of the printer plus a number (for example, KodakHERO2.2
+xxxx).
10 www.kodak.com/go/aiosupport
Connecting to a wireless
Connecting to a wireless