Copying
Two-sided copying
Manual two-sided copying
If the original is not on letter or A4-sized plain paper, or if you want the copy to be on paper other than letter or A4-
sized plain paper, you can make two-sided copies manually.
1. Load the paper into the paper tray.
2. Place your original on the scanner glass (see
3. Press
.
4. Press
to select Copy Document, then press OK.
5. If necessary, press
6. Press
to begin copying.
7. Remove the printed page from the output tray and rotate it 180 degrees, then place the page into the paper tray
(printed side down).
8. Place the next original on the scanner glass.
9. If necessary, press
10. Press
to begin copying.
48
Using the scanner glass,
to make changes to the copy settings.
to make changes to the copy settings.
www.kodak.com/go/aiosupport
29).