Connecting An Av Receiver Or Decoder; Connecting The Power Cable - Yamaha PianoCraft DRX-730 Owner's Manual

Connecting an AV receiver or
decoder
The DRX-730 downmixes multi-channel sources,
such as Dolby Digital and DTS, into a 2-channel
stereo mix that you can enjoy through the speakers
connected to the DRX-730. By connecting an AV
receiver/decoder to the DRX-730's OPTICAL
DIGITAL OUT jack, you can enjoy Dolby Digital and
DTS sources though the speakers connected to your
AV receiver/decoder.
Using an optical digital audio cable (sold
separately), connect the DRX-730's OPTICAL
DIGITAL OUT jack to a digital optical input on the
AV receiver/decoder.
Notes:
• Make sure the digital audio output settings are
configured so that the OPTICAL DIGITAL OUT
outputs MPEG, Dolby Digital, and DTS material
as it is and not as PCM.
• You may want to turn down the volume on the
DRX-730 all the way when listening through the
speakers connected to your AV receiver/decoder.
• The OPTICAL DIGITAL OUT outputs audio
only when the input source is DVD or USB.
(Europe model shown here.)
MAINS HDMI
R
6 MIN SPEAKER
SUBWOOFER OUT IN
SPEAKERS OUT AUX
Optical cable
(sold separately)
AV receiver/decoder
AM
ANT
GND
FM
ANT
75
UNBAL.
AV MONITOR OUT
P P
R B
Y
R OUT
VIDEO COMPONENT
OPTICAL
DOCK VIDEO OUT DIGITAL
OPTICAL
DIGITAL
IN

Connecting the power cable

Once you've completed all of the other connections,
connect the power cable to an AC wall outlet.
Connect to
an AC wall
outlet
Chapter 2: Getting Started
MAINS HDMI
R
6 MIN SPEAKER
SUBWOOFER OUT IN
SPEAKERS OUT AUX
15
En
2