GE JB940 Owner's Manual page 33

For best results when roasting large
turkeys and roasts, we recommend
using the probe included in the
convection oven.
To change the oven temperature
during the Convection Roast cycle,
press the CONVECTION ROAST pad
and then press the number pads to
set the new desired temperature.
How to Set the Oven for Convection Roasting
when Using the Probe
Do not lock the oven door with the latch during convection roasting.
The latch is used for self-cleaning only.
The display will flash PROBE and the oven control will
signal if the probe is inserted into the outlet, and you
have not set a probe temperature and pressed the
START pad.
Place the shelf in the lowest position (A). Insert the
1
probe into the meat.
Plug the probe into the outlet on the oven wall. Make
2
sure it is pushed all the way in. Close the oven door.
Press the PROBE pad.
3
Press the number pads to set the desired internal
4
probe temperature.
Press the CONVECTION ROAST pad.
5
Press the number pads to set the desired oven
6
temperature.
Press the START pad.
7
When the oven starts to heat, the words CONV ON
will be in the display. The word LO will replace the
roasting temperature in the display. After the internal
temperature of the meat reaches 100°F., the changing
internal temperature will be shown in the display.
When the internal temperature of the meat reaches
8
the number you have set, the probe and the oven
turn off and the oven control signals. To stop the
signal, press the CLEAR/OFF pad. Use hot pads to
remove the probe from the food. Do not use tongs
to pull on it—they might damage it.
CAUTION: To prevent possible burns, do not unplug the
probe from the oven outlet until the oven has cooled.
Do not store the probe in the oven.
NOTE:
If the probe is removed from the food before the final
temperature is reached, a tone will sound and the display
will flash until the probe is removed from the oven.
You will hear a fan while cooking with this feature. The fan will
stop when the door is opened but the heat will not turn off.
You can use the timer even though you cannot use
timed oven operations.
33