Selecting The Pbc (Playback Control) Function; Changing The Password; Resetting The System - Yamaha DVD-S661 Owner's Manual

Setup Menu
Selecting the PBC (playback control)
function
You can set playback control (PBC) to on or
off. This function is available only on Video
CD 2.0 with the playback control (PBC)
feature.
1
In "PREFERENCE PAGE", press 5/a to
highlight [PBC], and then press 3.
ON
Select this to display a disc menu.
OFF
Select this to not display a disc menu.
Playback starts from the beginning of a disc.
2
Press 5/a to select a setting, and then
press ENTER.
Note
You can also use the MENU button on the remote
control to turn on or off the playback control (PBC)
function (see "Using the playback control (PBC)
menu" on page 18).

Changing the password

The same password is used for both parental
control and disc lock. Enter your six-digit
password when prompted on the screen. The
default password is 000 000.
1
In "PREFERENCE PAGE", press 5/a to
highlight [PASSWORD], and then press 3
to select [CHANGE].
PREFERENCE PAGE
SUBTITLE
DISC MENU
PARENTAL
VR LIST
MP3/JPEG NAV
DIVX SUBTITLE
PBC
PASSWORD
32
En
CHANGE
2
Press ENTER to enter the "Password
Change Page".
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
3
Use the numeric buttons (0-9) to enter
your old six-digit password.
• When doing this for the first time, enter
"000 000".
• If you forget your old six-digit
password, enter "000 000".
4
Enter the new six-digit password.
5
Enter the new six-digit password again to
confirm the password.
6
Press ENTER to confirm your new
password.
➜ The new six-digit password is now
valid.

Resetting the system

You can reset all options and your personal
settings to the initial factory settings,
excluding your password for [PARENTAL]
and [DISC LOCK].
1 In "PREFERENCE PAGE", press 5/a to
highlight [DEFAULT], and then press 3
to select [RESET].
2
Press ENTER.
➜ All settings are reset to the initial
factory settings.
OK