Table of Contents
Advertisement
IV.
Your Digicadre's inclination can be adjusted by pulling on the adjustable support down.
Choose the inclination that suits you best among the 6 different levels (fig. 1).
To do it, lift the support, pinch notches and pull on the support to reach the slope of your
choice.
Plug the end of the mains adaptor into its socket and then connect the other end to the
wall-socket.
Fig.1
INSTALLING DIGICADRE
1.
Inclining the frame
2.
Electrical connection
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
11
Advertisement
Table of Contents
