Using The Menu; Choosing The Language - Telefunken Digicadre 7111BW User Manual

VI.

USING THE MENU

1.

Choosing the language

The default language is French. To choose another one, the menu must first be
accessed.
With the remote control
When the frame is in slide show mode and photos are being displayed, press the EXIT
button to leave the slide show, and then press SETUP to display the menu screen. On the
thirteenth line, the language is displayed (fig. 6). If you would like to change it, use the
remote control's UP or DOWN buttons, until the language line is highlighted (in blue), then
press ENTER. Every time this button is pressed, a different language is displayed.
(French, Spanish, Portuguese, Dutch, English, Italian, German). Once the menu is
displayed in the desired language, press EXIT followed by ENTER.
With the frame
When the frame is in slide show mode and photos are being displayed, press