Table of Contents
Advertisement
[Type some text]
Fig.1
3.
Installing the frame
Adjusting the stand
a.
Your DIGIFRAME's inclination can be adjusted by bringing the adjustable
support down.
Choose the inclination that suits you best among the 4 different levels (fig. 1). by
pressing and holding the button located on the support, and pulling the support
down. Set the black mark (white circle in fig. 1) to be facing marks numbered 1
or 2.
To set the frame in the vertical (portrait) position, unscrew the 4 thumb-wheels
that are found at the base, and turn the support set one quarter of a revolution.
Screw the thumb-wheels back on and set the support on the marks numbered 3
or 4.
Wall fixing
b.
You can also hang your DIGIFRAME on a wall using the wall slot on the back of
the frame.
Digiframe
Digital photo frame
Non binding document, subject to modification in the
event of misprint(s) – MKG0308
9
Advertisement
Table of Contents
