Table of Contents
Advertisement
With the remote control
When the frame is in slide-show mode and photos are being displayed, press the remote
control's EXIT button once, and then press SETUP. The menu is displayed. Use the UP
and DOWN buttons, until the "Multiple display" line (fig. 8) is highlighted.
Press the ENTER button to display the options, then select the desired image size using
the UP and DOWN buttons. Press ENTER to confirm your choice, and then press EXIT to
leave the menu. Press ENTER to launch the slide-show again: your images will be
displayed in the desired dimension.
With the frame
When the frame is in slide-show mode and photos are being displayed, press the
Advertisement
Table of Contents
