Roubleshooting Uide - GE DECT 0008579 User Manual

Dect 6.0 multi-handset speakerphone
Table of Contents

Advertisement

LOW BATTERY
MSG WAITING OFF
NEW CALL XX
NEW VOICE MAIL
NO CALLS
OUT OF RANGE
PAGING or
PAGING FROM
REPT
ROOM MONITORING....
SEARCHING
SPKR
UNKNOWN NAME/
CALLER/NUMBER
Troubleshooting Guide
Caller ID Solutions
No Display
• The battery must be fully charged. Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the unit from the wall and plug it in again.
• You must be subscribed to Caller ID service from your local telephone company
in order to receive Caller ID records.
Caller ID Error Message
• This message indicates either the presence of noise on the line, or that an invalid
message has been sent from the telephone company.
8
Indicates the battery needs to be charged.
Indicates voice mail has been retrieved from service
provider.
XX represents the number of new CID records not
reviewed.
Indicates voice mail has not been retrieved from service
provider.
Indicates there are no CID records in memory.
May indicate handset is too far away from the base or
that the power has been interrupted. Move closer and
check connections.
Someone pressed the find button on the base or delete/
int/conf button on the handset
Indicates a repeat call message. Indicates a new call
from the same number was received more than once.
The audio link between handsets is established.
Indicates handset is searching for the base.
Indicates the handset is in speakerphone mode.
The incoming call is from an area not serviced by CID
or the CID information was not sent.

Advertisement

Table of Contents
loading

Table of Contents