Emerson MONACO CF830GES00 Owner's Manual page 5

1/4-20 x 12mm OVAL
HEAD BLADE SCREW
(2 per flange)
Figure 3
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flange when installing the blade flanges,
balancing the blades or cleaning the fan. Do not
insert foreign objects in between rotating fan blades.
5. Remove and retain one of the switch housing
mounting screws (Figure 4) from the motor hub.
Loosen the two remaining switch housing screws.
6. Position the switch housing adapter onto the motor
hub. Rotate the switch housing adapter clockwise
to engage the key hole slots (Figure 4). Secure the
switch housing adapter to the fan motor housing
by reinstalling the previously removed screw into
the remaining hole. Tighten the three screws at
this time.
Figure 4
7. Engage the connector of the switch housing to the
switch housing adapter connector (Figure 5).
The two connectors are keyed and color-coded
and must be mated correctly (color-to-color) before
they can be engaged. Be sure the connector latch
closes properly.
BLADE FLANGE
INTERLOCKING
FEATURE
SWITCH HOUSING ADAPTER
SWITCH HOUSING
MOUNTING SCREW
SWITCH HOUSING
COLOR CODED
CONNECTOR
Figure 5
CAUTION: Before installing and tightening the
screws, be sure there are no wires pinched
between the switch housing adapter and the
switch housing.
8. Make sure all wires and connectors are inside the
switch housing, then position the switch housing
on the switch housing plate aligning the three
holes for installation.
9. Secure the switch housing by installing the four
#8-32 x 10mm pan head screws (Figure 6).
Figure 6
!
To avoid possible fire or shock, do not pinch wires
between the switch housing and the switch housing
adapter.
10. Carefully turn partially assembled fan upside
down and place gently in the styrofoam from
carton, in preparation of final installation.
5
SWITCH HOUSING
SWITCH HOUSING
ADAPTER
SWITCH HOUSING
ADAPTER COLOR
CODED CONNECTOR
SWITCH HOUSING
#8-32 X 10mm PAN
HEAD SCREW (4)
WARNING
U.L. Model No.: CF830