Changing To Radio Mode Or Selecting A Memory Bank; Tuning Into A Station; Storing Stations Or Calling Stored Stations; Scanning Stations - Blaupunkt Hamburg 420 BT Operating And Installation Manual

Radio mode
Changing to radio mode or selecting
a memory bank
The following memory banks are available in the
diff erent reception areas:
Region
EUROPE
USA
SOUTH AMERICA
THAILAND
u Press the SRC button
desired memory bank is displayed.
Notes:
• Up to 5 stations can be stored in each
memory bank.
• You can disable certain memory banks
that you do not want to use (see chapter
"User settings", section "Making settings
in the "TUNER" menu", menu item "BAND
SELECTION"). Deactivated memory banks
are skipped during the source selection
with the SRC button

Tuning into a station

There are various ways of tuning into a station:
Starting station seek tuning
u Turn rotary control
clockwise or clockwise to start station seek
tuning.
The display briefl y shows "SEARCH AUTO".
The radio tunes into the next receivable sta-
tion.
Notes:
• For the reception area "EUROPE": In the FM
waveband, only traffi c information stations
are tuned into if the priority for traffi c infor-
mation ( ) is switched on.
• The sensitivity of seek tuning can be ad-
justed (see the chapter "User settings",
section "Making settings in the "TUNER"
menu", menu item "SENSITIVITY").
8
Memory banks
FM1, FM2, FMT, MW, LW
FM1, FM2, FMT, AM, AMT
FM1, FM2, FMT, AM, AMT
FM1, FM2, FMT, AM, AMT
@
repeatedly until the
@
.
7
one notch counter-
Tuning into stations manually
u Press the rotary button
manual station tuning.
The display briefl y shows "SEARCH MANUAL".
u Turn the rotary control
quency in increments.
Note:
The manual station tuning is automatically
exited approx. 15 seconds after the last fre-
quency change, and the station seek tuning is
started by turning the rotary control
Storing stations or calling stored
stations
u Select the desired memory bank.
u If necessary, set the desired station.
u Press the station button 1 - 5
2 seconds to store the current station under
the button.
- or -
u Briefl y press the station button 1 - 5
up the stored station.

Scanning stations

With the scan function, you can scan either every
receivable station or every stored station of the
current waveband.
Note:
You can adjust the scan time for each station
(see the chapter "User settings", section "Mak-
ing settings in the "VARIOUS" menu", menu
item "SCAN TIME").
Scanning all receivable stations of the
waveband
u Press the MENU button
onds to start scanning.
During the scan, the display alternately dis-
plays "SCAN" and the current frequency as
well as memory bank or station name.
u Briefl y press the MENU button
tinue listening to the station that is currently
being scanned.
7
once to activate
7
to change the fre-
7
.
>
for approx.
>
to call
2
for approx. 2 sec-
2
to con-