Installation Instructions - Blaupunkt Hamburg 420 BT Operating And Installation Manual

Installation instructions

Safety instructions
When carrying out installation work and
making connections please observe the following
safety instructions:
•
Disconnect the negative terminal of the bat-
tery! When doing so, please observe the vehi-
cle manufacturer's safety instructions.
•
Make sure you do not damage vehicle compo-
nents when drilling any holes.
•
The cross sections of the positive and negative
cables must not be less than 1.5 mm².
•
Do not connect the vehicle's plug connec-
tors to the radio!
You can obtain the adapter cable required
for your vehicle type from any BLAUPUNKT
dealer.
•
Depending on the model, your vehicle may
diff er from the description provided here. We
accept no responsibility for any damages due
to incorrect installation or connection or for
any consequential damages.
If the information provided here is not suita-
ble for your specifi c installation requirements,
please contact your Blaupunkt dealer, your ve-
hicle manufacturer or our telephone hotline.
When installing an amplifi er, you must fi rst con-
nect the device earth connections before con-
necting the plugs for the line-out jacks.
Earth connection of external devices may not
be connected to earth of car sound system
(housing).
Installation instructions
Supplied mounting hardware
1 011 202 322 / 1 011 202 422:
1 011 202 323 / 1 011 202 423:
33