Ford Windstar Owner's Manual page 63

Error 1 — Possible problem cartridge. The cassette tape player
will eject the tape. Insert the tape again. If the same error code
appears in the display, try a different cartridge.
Error 2 — Tape eject or load failure. Your cassette tape player
will go into the pause mode. Push "EJCT" to eject the tape. If
the tape doesn't eject, refer the problem to qualified personnel
for service.
Clock Operation
How to view the clock mode
Press the "CLOCK" button to alternate the frequency and time
in the display. In the clock mode, pressing any radio function
will automatically display the radio frequency for approximately
ten seconds before changing back to the clock mode.
How to set the clock
Press and hold in the "CLOCK" button, press the "SEEK"
button left ( b ) to advance the hours and right ( a ) to advance
the minutes.
NOTE: The clock displays 12-hour time with no AM/PM
indications.
NOTE: On the High-Level Audio System, the clock can be set
with the radio power on or off.
NOTE: In order to maintain the performance of your cassette
stereo system, refer to "Tips on Caring for the
Cassette Player and Tapes" later in this chapter.
62