Ford Windstar Owner's Manual page 49

NOTE: If after you insert a disc, the disc is ejected and
"ERROR" begins scrolling in the display, remove the
disc and reinsert it right side up (label side up).
The digital display on your CD player will either show the
track (selection) number or the elapsed time. (The display mode
can be selected by pressing the "CLOCK" button.) Indicators for
play ( a ), stop ( X ) and compression on ("C") are also in the
display. (These features are described later.)
Once a disc is inserted, operation of the CD player will override
that of the radio.
NOTE: The volume, bass, treble, balance and fader controls
on the radio are also used with the CD player. Refer
to earlier operating instructions on these controls.
How to insert a disc and begin play
Insert one disc, label side up into the disc opening. When
inserted, the disc automatically loads into the unit and play
starts at the beginning of the first track (selection).
When the disc reaches the end, the disc player automatically
returns to the beginning of the disc and resumes playing.
NOTE: Once a disc is inserted, the disc opening is secured to
prevent the accidental insertion of a second disc.
NOTE: The CD player has heat protection circuitry to protect
the laser diode. If the temperature of the player
reaches 167˚F (75˚C), the heat detection circuit will
shut off the player and "TOO HOT" will scroll in the
display for five seconds (radio will resume playing).
When the temperature returns to normal operating
range, the CD player will again be operational.
48