Ford Windstar Owner's Manual page 58

frequencies, stopping momentarily on the stations being set into
the memory buttons. The radio is now in the "AUTO" mode for
the selected band and this display will show "AUTO" each time
a preset is activated.
NOTE: If there are fewer than five strong stations in the
frequency band, the remaining unfilled buttons will
store the last strong station detected on the band.
After all stations have been filled, the radio will begin playing
the station stored on memory button 1.
To deactivate the Auto Memory Store mode and return to the
manually-set memory button stations (or those stations set using
Auto Memory Load), simply push the "AUTO PRESET" button.
Display will show "AUTO" then "OFF." The next time Auto
Memory Store is activated on that band, the radio will store the
next set of five strong stations.
Adjusting the tone balance and speaker output of your
radio
Increasing or decreasing bass response
Push the "AUDIO" button repeatedly until the display reads
"BASS." Push the "+" side of the "VOL" button to increase
bass (more "lows"), and push the "-" side to decrease bass
(less "lows").
Increasing or decreasing treble response
Push the "AUDIO" button repeatedly until the display reads
"TREB." Push the "+" side of the "VOL" button to increase
treble (more "highs"), and push the "-" side to decrease
treble (less "highs").
Electronic Sound Systems
57