Ford Windstar Owner's Manual page 47

To deactivate the Auto Memory Store mode and return to the
manually-set memory button stations (or those stations set using
Auto Memory Load), simply push the "AUTO PRESET" button.
Display will show "AUTO" then "OFF." The next time Auto
Memory Store is activated on that band, the radio will store the
next set of five strong stations.
Using the "AUDIO" button to adjust the tone balance
and speaker output
Increasing or decreasing bass response
Push the "AUDIO" button repeatedly until the display reads
"BASS." Push the "+" side of the "VOL" button to increase
bass (more "lows"), and push the "-" side to decrease bass
(less "lows").
Increasing or decreasing treble response
Push the "AUDIO" button repeatedly until the display reads
"TREB." Push the "+" side of the "VOL" button to increase
treble (more "highs"), and push the "-" side to decrease
treble (less "highs").
Adjusting speaker balance
Balance control allows you to adjust the sound distribution
between the right and left speakers. Push the "AUDIO"
button repeatedly until the display reads "BAL." Push the
"+" side of the "VOL" button to shift the sound to the right
speakers, and push the "-" side to shift the sound to the left
speakers.
Adjusting speaker fader
Fade control allows you to adjust the sound distribution
between the front and rear speakers. Push the "AUDIO"
button repeatedly until the display reads "FADE." Push the
"+" side of the "VOL" button to shift the sound to the front
speakers, and push the "-" side to shift the sound to the rear
speakers.
46