Ford Windstar Owner's Manual page 48

NOTE: Illuminated bars in the display show relative levels of
bass and treble and positions of speaker balance and
fader functions for five seconds after adjustments are
made, then revert to volume level set.
Clock operation
When in the radio mode, push the "CLOCK" button to switch
from radio frequency to clock. Only the clock numerals will be
displayed in the clock mode — there is no A.M./P.M.
indication. When in the clock mode, the time will be displayed
until the button is pushed again. However, if you retune the
radio while it is in the clock mode, the new radio frequency
will be displayed for approximately ten seconds and then
change back to clock.
When in the CD mode, push the "CLOCK" button to change
the display from elapsed time mode to track number mode to
clock mode. If the CD track selection is changed when you are
in the clock or elapsed time mode, the new track number will
be displayed for approximately ten seconds and then revert
back to the previous mode.
To set the clock, simultaneously press the "CLOCK" button and
either the bottom ( b ) half of the "SEEK" button to set hours,
or the top ( a ) half of the "SEEK" button to set minutes.
NOTE: The clock can be set with the radio and/or ignition on
or off.
Using the Controls on Your New Compact Disc Player
Your new Ford Compact Disc Player is capable of playing 12
cm or 8 cm discs, without an adapter. The player operates when
the power is on and a disc is inserted (label side up). Handle
the disc by its edge only. (Be sure to read and follow all of the
care and cleaning instructions under How To Take Care of and
Clean Your CD Player and Discs.)
Electronic Sound Systems
47