Replacing Front Parking Lamp/Turn Signal Bulbs; Aerodynamic; Sealed Beam - Ford Econoline E-250 Owner's Manual

Lights
2. Remove the four screws from the
headlamp assembly and carefully
remove the lamp/bezel.
3. Remove the four screws and the
retaining ring.
4. Disconnect the electrical
connector from the lamp and
remove the lamp.
To install the new lamp, follow the
removal procedures in reverse order.

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the off position.
2. Remove the headlamp assembly. Refer to Replacing headlamp bulbs
in this section.

Aerodynamic

Sealed beam

3. Rotate the bulb socket counterclockwise and remove.
4. Carefully pull the bulb straight out of the socket.
To complete installation, follow the removal procedures in reverse order.
60
2012 Econoline (eco)
Owners Guide, 1st Printing
USA (fus)