Resuming A Set Speed; Increasing Speed While Using Speed Control; Reducing Speed While Using Speed Control; Steering Wheel Controls (If Equipped) - Ford Econoline E-250 Owner's Manual

Resuming a set speed

Press and release RES. This will automatically return the vehicle to the
previously set speed.

Increasing speed while using speed control

To increase the set speed:
• Press and hold SET/ACCEL until you get to the desired speed, then
release. You can also use SET/ACCEL to operate the tap-up function.
Press and release SET/ACCEL to increase the vehicle set speed in
1 mph (1.6 km/h) increments.
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed, press and release SET/ACCEL.

Reducing speed while using speed control

To reduce the set speed:
• Press and hold COAST until you get to the desired speed, then
release. You can also use COAST to operate the tap-down function.
Press and release COAST to decrease the vehicle set speed in 1 mph
(1.6 km/h) increments.
• Press the brake pedal until the desired vehicle speed is reached, then
press and release SET/ACCEL.
Turning off speed control
To turn off the speed control, press OFF or turn off the ignition.
Note: When you turn off the speed control or the ignition, your speed
control set speed memory is erased.

STEERING WHEEL CONTROLS (IF EQUIPPED)

SYNC system hands free
control feature (if equipped)
Press briefly to use the voice
command feature. You will hear a
tone and LISTENING will appear in
the radio display. Press and
hold to exit voice command.
Press to activate phone mode or answer a phone call. Press and
hold to end a call or exit phone mode.
For further information on the SYNC system, refer to the SYNC
supplement.
2012 Econoline (eco)
Owners Guide, 1st Printing
USA (fus)
Driver Controls
71