Table of Contents
Advertisement
To turn your Air Conditioner & Heater system
on, move the lower lever to any position except
OFF. This will turn the fan ON and allow air
flow into the vehicle. To turn your Air
Conditioner & Heater off, move the lower lever
to OFF. This will turn the fan off and stop air
flow from coming into the vehicle.
Temperature selection
The temperature lever is the top lever located
below the broken RED and BLUE band. The
RED part of the band (right side) is the heat or
WARM area. The BLUE area (left side) is the
cooling or COOL temperature area. Any position
selected between full right and full left will give
a temperature between the two extreme
temperatures.
H Fan speed adjustment
The H knob (upper left) on the control is the
fan speed knob which controls the volume of air
flow. Rotate the H knob to the right to increase
fan speed and increase the amount of air
entering the vehicle. Four fan speed positions are
available and are indicated by LO, two separate
dots and HI beside the H control knob. The HI
position provides the most air flow.
Airflow selections (lower lever)
VENT
Use VENT to bring outside air through the
instrument panel registers. You can heat the air
in this position by moving the top lever into the
RED area. The air CANNOT be cooled below
the outside temperature regardless of the top
lever setting. Select NORMAL A/C or MAX A/C
to get cooled air through the instrument panel
registers.
88
- Quick Links:
- Servicing Your Econoline
Hide quick links:
Advertisement
Table of Contents
