Using The "Seek" Function; Using The "Scan/Tune" Button To Scan Radio Stations; Setting The Station Memory Preset Buttons - Ford Econoline/Club Wagon E-150 Owner's Manual

Using the "SEEK" function

This feature on your radio allows you to
automatically select listenable stations up or
down the frequency band. Press the top a
half of the "SEEK" button to select the next
listenable station up the frequency band.
Press the bottom b half of the button to
select the next listenable station down the
frequency band. By pressing and holding the
button, listenable stations can be passed over
to reach the desired station.
Using the "SCAN/TUNE" button to scan
radio stations
Pressing the "SCAN/TUNE" button once
enters the scan mode (display will indicate
"SCN"). Pushing the top a half of the
"SEEK" button will begin the scan mode up
the frequency band, stopping on each
listenable station for approximately five
seconds. Pushing the bottom b half of the
"SEEK" button will begin the scan mode
down the frequency band, again stopping on
each listenable station for approximately five
seconds.
To stop the scan mode on the presently
sampled station press the "SCAN/TUNE"
button again.

Setting the Station Memory Preset buttons

Your radio is equipped with 5 station
memory buttons. These buttons can be used
to select up to 5 preset AM stations and 10
FM stations (5 in FM1 and 5 in FM2). Follow
the easy steps below to set these buttons to
the desired frequencies.
152