Download Print this page

HP 1410 series Specification page 19

Hp 1410 switch series
Hide thumbs Also See for 1410 series:

Advertisement

QuickSpecs
Technical Specifications
I/O ports and slots
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Frequency
Safety
Emissions
Immunity
24 RJ-45 autosensing 10/100 ports; Duplex: half or full (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX)
2 RJ-45 autosensing 10/100/1000 ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full
only (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T)
Supports a maximum of 24 autosensing 10/100 ports plus 2 autosensing 10/100/1000 ports
Dimensions
Weight
2 Kb EEPROM; packet buffer size: 2.5 Mb
Mounts in an EIA-standard 19 in. telco rack (hardware included); wall, desktop, and under-table mounting
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Maximum heat
dissipation
Voltage
DC voltage
Current
Maximum power rating
Notes
UL 60950-1; CSA 22.2 60950-1; IEC 60950-1:2005; EN 60950-1:2006 + A11:2009
FCC Rules Part 15, Subpart B Class A
Generic
EN
DA - 13674 Worldwide — Version 12 — December 16, 2013
13.23(w) x 6.65(d) x 1.73(h) in (33.6 x 16.89 x 4.39 cm) (1U height)
2.98 lb (1.35 kg)
< 5.6 µs (LIFO 64-byte packets)
< 2.2 µs (LIFO 64-byte packets)
6.5 Mpps (64-byte packets)
8.8 Gb/s
8192 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 0 dB
50/60 Hz
37 BTU/hr (39.03 kJ/hr)
100 - 240 VAC
12 V
0.9 A
10.8 W
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
The exact input voltage and frequency rating are determined by the specific
power adaptor part number ordered. Please select the correct power adaptor
country option.
EN 55022 CISPR 22
EN 55024, CISPR 24
HP 1410 Switch series
Page 19

Advertisement

loading