System Memory Support - HP Compaq 8200 Specification

QuickSpecs
Standard Features and Configurable Components (availability may vary by country)
ME Wake-on-LAN
DASH 1.1 compliance
IPv6 Support
Fast Call for Help – a client inside or outside the firewall may initiate a call for help via BIOS screen, periodic connections, or alert
triggered connection
Remote Scheduled Maintenance – pre-schedule when the PC connects to the IT or service provider console for maintenance.
Remote PCs can get required patches, be inventoried, etc by connecting to their IT console or Service Provider when it's
convenient
Remote Alerts – automatically alert IT or service provider if issues arise
Access Monitor – Provides oversight into Intel® AMT actions to support security requirements
PC Alarm Clock
Microsoft NAP Support
Host Base set-up and configuration
Management Engine (ME) firmware roll back
Wireless AMT functionality on Desktop (WoDT)
Enhanced KVM resolution
Redundant Array of Independent Drives (RAID)
Flexible implementation:
DriveLock is supported while in RAID mode. Users can manage the DriveLock password from within F10 Setup. Locked drives will
be displayed as such in the RAID option ROM interface.
Hard drive information can be viewed within F10 Setup while in RAID mode. Previously, the hard drives will not appear in Drive
Configuration when switching to RAID mode.
DPS Self Test can be executed on physical hard drives while in RAID mode.
The RAID Setup Utility (accessed through CTRL-I) can be protected by the F10 Setup password.
NOTE:
RAID 1 is the only RAID configuration offered via factory configurations. The pre-configured systems:
Are only available on the SFF and CMT form factors. The USDT does not support RAID as it does not allow for more than one hard
disk drive.
Are complete RAID systems and have both drives installed. If the CMT is configured with three hard disk drives, the third drive is
would be unpartitioned and not part of the RAID array
Have the necessary Option ROM configuration.
Are pre-loaded and pre-installed with all required Intel software.
Include a preinstalled operating system that is mirrored mode out of the box.
Please refer to the HP White Paper titled "Advanced Host Controller Interface (AHCI) and Redundant Array of Independent Disks (RAID)
on HP Compaq 8200 Elite Series PCs" at:

System Memory Support

The HP Compaq 8200 Elite Series supports the 2
processor is designed for a two-chip platform consisting of a processor and Platform Controller Hub (PCH). Unlike previous generations,
the processor includes an integrated memory controller (IMC). The IMC supports DDR3 protocols with two independent, 64-bit wide
channels each accessing one or two DIMMs.
Two channels of non-ECC unbuffered DDR3 memory with a maximum of two UDIMMs or SODIMMs per channel
http://www.hp.com for more information and instructions.
nd
generation Intel® Core™ processor family. Based on a new PC micro-architecture, the
DA - 13879 North America — Version 36 — August 15, 2013
HP Compaq 8200 Elite Series
Page 9