Technical Specifications - Communications - HP Compaq 8200 Specification

Hp compaq 8200 elite series
Table of Contents

Advertisement

QuickSpecs

Technical Specifications - Communications

Intel 82579LM GbE Network Connection
Connector
System Interface
Controller
Memory
Data rates supported
IEEE Compliance
Bus architecture
Data transfer mode
Power requirement
Boot ROM support
Network transfer mode
Network transfer rate
Environmental
Management
Alerting
(integrated)
RJ-45
Integrated on PCA
Intel 82579LM GbE platform LAN connect networking controller
24 KB FIFO packet buffer memory
10/100/1000 Mbps
802.1P
802.1Q
802.2
802.3
802.3ab
802.3az
802.3u
PCI Express and SMBus
PCIe-based interface for active state operation (S0 state) and SMBus for host and management
traffic (Sx low power state)
Requires 3.3V and 1.05V or just 3.3V with integrated regulators
Power consumption 0.697 Watts
Yes
Full-duplex
Half-duplex (not supported for the 1000BASE-T transceiver)
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps
Operating Temperature: 0° to 85° C
Operating Humidity: 60% RH
WOL, auto MDI crossover, PXE, Muti-port teaming, RSS, Advanced cable diagnostic.
ASF 2.0 support; AMT 7.0 support
DA - 13879 North America — Version 36 — August 15, 2013
HP Compaq 8200 Elite Series
Page 28

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq 8200 elite series

Table of Contents