HP Compaq 8200 Specification page 26

QuickSpecs
Technical Specifications - Audio
High Definition Audio
Type
HD Stereo Codec
Audio I/O Ports
Internal Speaker Amplifier
Multi-streaming Capable
Sampling
Wavetable Syntheses
Analog Audio
# of Channels on Line-Out
Internal Speaker
External Speaker Jack
HP Thin USB Powered Speakers
On/Off/Volume Controls
Power LED
Frequency Response
Watts
Dimensions/Speaker
(H x W x D)
Net Weight
Color
Environmental
(all conditions non-condensing)
Speaker Cable Length
Integrated
Realtek 2-channel ALC261 codec
Front microphone-In (150-K ohm Input Impedance)
Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio
driver)
Rear Line-Out* (190 ohms Output Impedance, expects at least a 10-K ohm load)
Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load)
Front Microphone/Headphone jack is re-task able to provide Microphone input, line-in or Headphone
output to support connecting two headphones to the front of the system. When configured as a
second front headphone output, both front headphone outputs are always driven with the same
signal.
All ports are 3.5mm
1.5W amplifier for the internal speaker only. External speakers must be powered externally. Rear
Line-in audio port is re-taskable as either Line-in or Microphone-In.
Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to
be sent to/from the front and rear jacks.
8 kHz - 192 kHz
Yes – Uses OS soft wavetable
Yes
Stereo (Left & Right channels)
Yes
Yes
Right side of right speaker
Front of right speaker (green)
FO to 20kHz
2/3 watt (normal/maximum)
5.72 x 3.74 x 0.96 in
14.52 x 9.50 x 2.45 cm
0.68 lbs
0.31kg
Black
Operating Temperature: 14° to 104° F (-10° to 40° C)
Relative Humidity 40% to 90%
Input Cord: 5.91 ft (1800 mm)
L-channel Cord: 3.28 ft (1000 mm)
USB Cord: 5.91 ft (1800 mm)
DA - 13879 North America — Version 36 — August 15, 2013
HP Compaq 8200 Elite Series
Page 26