HP ProLiant DL160 Quickspecs page 18

QuickSpecs
Pre-configured Models
Energy Star- Performance Model
HP ProLiant DL160 Gen8
E5-2640 2P 16GB-R P420
Hot Plug 8 SFF 500W PS
Perf Server
662084-xx1
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
Warranty
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Power Supply
Fans
Management
Form Factor
DA - 14282 Worldwide — Version 22 — December 13, 2013
HP ProLiant DL160 Generation 8 (Gen8)
HP 361i Integrated Dual Port Gigabit Server Adapter
HP Dynamic Smart Array B120i controller
NOTE: Provides data transmission speeds up to 3Gb/s.
None ship standard; includes 3 LFF hard drive blanks
Up to 4 large form factor drives
(1) (Optional: DVD-ROM, DVD-RW)
500W Platinum FIO Power Supply with Backplane (ships standard)
(5) Non hot plug redundant fans
HP iLO Management Engine (standard)
Optional:HP iLO Scale-Out or HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. Caution: HP recommends that a
minimum of two people is required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of people to
use for any installation
Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor,
0-Years Onsite support (3-1-1 warranty in APJ)
(2) Intel® Xeon® E5-2640 (2.5GHz/6-core/15MB/7.2GT-s QPI/95W, DDR3-
1333, HT, Turbo2- 3/3/4/4/5/5) processor
15MB (1 x 15MB) L3 cache
16GB (4x 4GB DDR3-1333MHz RDIMMs)
NOTE: Total of 24 DIMM slots
HP 361i Integrated Dual Port Gigabit Server Adapter
HP Smart Array P420/ 1G FBWC controller
None ship standard; includes 7 SFF hard drive blanks
Up to 8 small form factor drives
(1) (Optional: DVD-ROM, DVD-RW)
500W Platinum FIO Power Supply with Backplane (ships standard)
(7) Non hot plug redundant fans
HP iLO Management Engine (standard)
Optional: HP iLO Scale-Out or HP Insight Control
1U
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. Caution: HP recommends that a
minimum of two people are required for all Rack Server installations. Please
refer to your installation instructions for proper tools and number of people to
use for any installation
Page 18