Fujitsu ScanSnap SV600 Basic Operation Manual page 76

1. Modify the corner points.
The corner points can be modified by either of the following:
l Double-click the position where you want to move the corner points.
a The corner points automatically move to the double-clicked position.
If the corner points cannot be modified properly, drag them to move.
l Drag the corner points to desired positions.
Modify the corner points at both ends of the gutter first and then the corners of the book.
2. Modify the outline.
Drag the outline to align it with the shape of the book. If it is hard to align the outline with the
shape of the book, position the outline little by little.
To make it easy, click an outline near the corner points and drag and drop the outline to align
it with the shape of the book repeatedly.
5.
Click the [Apply] button.
a A message for confirming the correction target appears.
6.
Click the [Selected Pages] button.
a The page distortion is corrected.
When you have completed correcting the page distortion, click the [Save and Exit]/[Save
and Quit] button.
HINT
To correct another distorted page, select the page for which the distortion is to be corrected in
[Final image], and repeat steps 2 to 6.
76
Scanning Books