Desktop Installation - GE 26980 User Manual

D
ESKTOP
1. Set the RINGER switch on the handset to ON.
2. Place the handset in the base.
3. Raise the base antenna.
4. Set the TONE/PULSE switch to TONE for touch-tone service, or PULSE
for rotary service. If you don't know which type of service you have,
check with the phone company.
5. Plug the power supply cord into the base and then into an AC outlet.
The CHARGE/IN USE light comes on indicating that the battery is
charging.
Allow the phone to charge for 12 hours before using the first
time. If you don't charge the phone properly (for 12 hours)
when you first set up the phone, perfomance of the battery will
be compromised.
6. After charging, connect the telephone cord to the phone and then to the
wall jack.
CAUTION: Use only the Thomson 5-2476 (black)/ 5-2475 (white) power supply
that came with this unit. Using other power supplies may damage the unit.
I
NSTALLATION
3
5
4
6
1
2
7