Installation; Desktop Installation - GE 26936 User Manual

I
NSTALLATION
NOTE: For desktop charging only,
the handset is able to charge
facing up or down.
D I
ESKTOP NSTALLATION
1. Make sure the mounting
bracket is securely fastened.
2. Set the RINGER switches (on
both the handset and the base)
to ON.
3. Plug the power supply cord
into the POWER 12V DC jack
on the base and into an AC outlet.
4. Place the handset in the base to charge for 12 hours. The CHARGE/IN
USE indicator (on the base) comes on to indicate that the battery is
charging. If you don't charge the handset battery properly (for 12
hours) when you first set up the phone, performance of the
battery will be compromised.
5. Plug the telephone line cord into the TEL LINE jack on the base and into
a modular jack.
6. Raise the base antenna.
NOTE : The phone automatically defaults to touch-tone dialing. To change to
pulse (rotary) dialing, see "Tone/Pulse Dialing." If you don't know which type
of service you have, check with the phone company.
CAUTION: Use only the ATLINKS 5-2470 (black)/5-2485 (white)
power supply that is compatible with this unit. Using other power
supplies may damage the unit.
6
6
3
5
2
4
1