Handset Setup - GE 21029 User Manual

4. Press mute/prog button and ROOM MONITOR EXTENSION? shows in the
display.
5. Press the handset number of the handset being monitored.
NOTE: When this phone system is expanded (up to 4 handsets by
purchase of optional Model 21009A handset with recharge cradle),
handsets are named HANDSET 1, HANDSET 2, HANDSET 3, and
HANDSET 4 respectively.
6. If handset 1 is the room monitoring initiator, the following displays will
be shown.
ROOM MONITOR
HANDSET 2
Calling handset 1
NOTE: If handsets have been named, then the name will be displayed on
LCD instead of handset numbers.
NOTE: During the room monitoring, it will emit a beep tone if there are
incoming calls. You may press TALK/END/call back button to answer the
call and quit the room monitor mode.
NOTE: Press the *exit button on the handset to exit the room monitor.
NOTE: After you initiate the room monitor, you can switch to use handset
speakerphone to do the room monitoring by pressing the SPK button on
the initiater handset.

Handset Setup

You may program the following items:
Language, Handset Name, RingerTone, Ringer Volume, VIP Melody, Key
Tone ON/OFF, Message Alert, Ring Select, Security Code, Area Code,
Registration, De-Registration and Default Setting.
During programming, you may press the *exit button at any time to exit the
menu and go to the sub-menu and keep the previous setting.
20
ROOM MONITOR
EXTENSION ?
ROOM MONITOR
HANDSET 1
Called handset 2