Memory - GE 21029 User Manual

3. When the receiving handset connects, press theTALK/END/call back
button on the originating handset to transfer the call.
-OR-
Press theTALK/END/call back button on the originating handset to
transfer the call. If the receiving handset does not answer within 30
seconds, the originating handset rings back and displays CALLBACK. If
the originating handset does not answer within 20 seconds, the call is
automatically dropped.

Memory

You may store fifty 15-character names and 20-digit telephone numbers in
the handset memory.
Storing a Name and Number in Memory
1. Make sure the phone is OFF (not in talk mode).
2. Press the mem button to display SELECT MEMORY 01-50.
3. Press the desired memory location button (01 through 50) or use the
cid/vol ( or ) button to scroll to desired the memory location.
NOTE: If the memory location is occupied, the memory location number
and stored name and telephone number appear in the display. If the
memory location is empty, EMPTY appears in the display.
4. Press the mem button.The display shows ENTER NAME.
5. Use the touch-tone pad to enter a name (up to 15 characters). More than
one letter is stored in each of the number keys. For example, to enter Bill
Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for
the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times
for the second letter L, and press the 1 key to insert a space between the
first and last name. Press the 7 key 4 times for the letter S; press the 6 key
once for the letter M; press the 4 key 3 times for the letter I; press the 8
key for the letterT; press the 4 key twice for the letter H.
NOTE: If you make a mistake press the del button to backspace and erase
the wrong character(s) or number(s).
37