Download Print this page

RCA IP160S Quick Start Manual page 2

Rca ip phone
Hide thumbs

Advertisement

Phone web interface
• Press
to access main menu.
• Select Status
Network Status. Check IP address.
• Open a web browser on your computer. Enter http:// and the IP address in the address bar and confirm.
• Default login and password are "admin/0000" for administrator and "userx/0000" for users, where x is handset number
• Minimum config is sip account. Select System
SIP Account Management. Check administrator guide for details.
Note: you can also configure sip account using handset keypad. Go to Menu
Making a call
• Pre-dialing: enter the phone number and press
• Direct dialing: press . Enter the phone number.
• Handsfree: enter the phone number and press
twice.
• Headset: connect the headset to the phone, enter phone number and press
Note: to place a call from a specific line, make a long press on
Accepting a call
• Handset mode: press
.
• Headset mode: press
.
• Handsfree mode: press
twice.
Putting a call on hold
• Select Hold with navigator and press
.
• To retrieve the call, select Unhold with navigator and press
Note: with more than one active call, select call with Switch softkey .
3-party conference
• Once in line with 1st caller, press 2nd Call softkey, then select the type of call and press
• Dial 2nd party number or select handset and press
Note: you may be asked to select the line to use for the second call.
Call transfer
Attended transfer:
• Once in line with 1st caller, press 2nd Call softkey, then select the type of call and press
• Dial the second telephone number or select handset.
• When the call is answered, select Transfer from call options list to complete the transfer.
Blind transfer:
• Once in line with 1st caller, press Transfer softkey.
• Dial the destination telephone number and press Transfer soft key.
Settings
VoIP Account Setup
.
.
, select the desired line and press
.
.
.
.
.
Call forward
• Press
to open main menu. Select Services
• Select the line for which you want to set call forward.
• Then select the type of call forward.
• Set the status to enabled/disabled, fill in destination number and press
Paging and Intercom
• To locate your handsets, press the paging key
• To make an internal call to another handset, press
Language selection
Press
to open main menu. Select Settings
Language.
Select the desired language and press
.
Phonebook
Access phonebook :
• Press
.
• Select the Directory type.
• Select a contact and press Options soft key to select an operation.
Add new entry :
• Press
.
• Select the Directory type.
• • Select Options and press Add soft key to add a new entry.
• Enter first name, last name and numbers.
• Press Save soft key.
Redial
• Press
.
• Highlight a record.
• Press
to make the call, you may select the line by long pressing
.
Do not Disturb
• Press
, select Services
DND.
• Select the line for which you want to set DND feature.
• Select Activate and press
.
Voicemail
• Press
to access voicemail.
OR
• Go to Menu
Voicemail to check number of messages. Press Call softkey to retrieve your messages.
Call Forward.
.
on the base. Press again to cancel.
key, select the desired handset from the list and press
.
.

Advertisement

loading

  Related Manuals for RCA IP160S