5.9 Safety
5.9.1 Underwriters Lab(UL) Approval
DYLA-28100/27900/26480 complies with UL 1950.
5.9.2 Canadian Standards Authority(CSA) Approval
DYLA-28100/27900/26480 complies with CSA C22.2, #950-M1993.
5.9.3 IEC Compliance
DYLA-28100/27900/26480 complies with IEC 950.
5.9.4 German Safety Mark
DYLA-28100/27900/26480 are approved by TUV on Test Requirement:
EN 60 950:1988/A1:1990/A2:1991.
5.9.5 Flammability
Printed Circuit boards used in this product are made of material with a UL recognized flammability rating of
V-1 or better. The flammability rating is marked or etched on the board. All other parts not considered
electrical components are made of material with a UL recognized flammability rating of V-1 or better except
minor mechanical parts.
5.9.6 Secondary Circuit Protection
This product utilizes printed circuit wiring that must be protected against the possibility of sustained com-
bustion due to circuit or component failure. Adequate secondary over current protection is the responsibility
of the using system.
User must protect the drive from it's electrical short circuit problem.
10 A limit is required for safety
purpose.
5.10 Packaging
Drives will be shipped in appropriate containers and placed on pallets.
Drives are shipped in ESD protective bags.
33
Specification