Set Max Address (F9H) - IBM DJSA-210 - Travelstar 10 GB Hard Drive Specifications

2.5 inch ata/ide hard disk drive
Hide thumbs Also See for DJSA-210 - Travelstar 10 GB Hard Drive:
Table of Contents

Advertisement

Output Parameters To The Device
Feature
Note 1. When the Feature register is 03h ( = Set Transfer mode) the Sector Count Register specifies the
transfer mechanism. The upper 5 bits define the type of transfer and the low order 3 bits encode the mode
value.
PIO Default Transfer Mode
PIO Default Transfer Mode,Disable IORDY
PIO Flow Control Transfer Mode x 00001 nnn
Multiword DMA mode x 00100 nnn
Ultra DMA mode x 01000 nnn
When the Feature register is 05h ( = Enable Advanced Power Management) the Sector Count Register
specifies the Advanced Power Management level.
C0h–FEh
80h–BFh
01h–7Fh
00h, FFh
Note 2. If the number of auto reassigned sectors reaches the device's reassignment capacity, the write
cache function will be automatically disabled. Although the device still accepts the Set Features command
(with Feature register = 02h) without error, the write cache function will remain disabled. For the current
write cache function status, refer to the Identify Device Information (129 word) by the Identify Device
command.
Hard reset or power off must not be done in 5 seconds after write command completion when write cache
is enabled.
Note 3. When the Feature register is 85h (= Disable Advanced Power Management) the deepest Power
Saving mode becomes Active Idle.
Destination code for this command.
02H
Enable write cache (See note 2)
03H
Set transfer mode based on value in sector count register
05H
Enable Advanced Power Management
09H
Enable Address Offset mode
44H
40 bytes of ECC apply on Read Long/Write Long commands
55H
Disable read look-ahead feature
66H
Disable reverting to power on defaults
82H
Disable write cache
85H
Disable Advanced Power Management (See note 3)
89H
Disable Address Offset mode
AAH
Enable read look-ahead feature
BBH
4 bytes of ECC apply on Read Long/Write Long commands
CCH
Enable reverting to power on defaults
The deepest Power Saving mode is Active Idle
The deepest Power Saving mode is Low power Idle
The deepest Power Saving mode is Standby
Aborted
Travelstar 32GH/30GT/20GN hard disk drive specifications
00000 000
00000 001
(nnn=000,001,010,011,100)
(nnn=000,001,010)
(nnn=000,001,010,011,100)
154

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents