H
R
Input Parameters From The Device
Sector Count
Sector Number
Cylinder High/Low
H
This indicates the head number of the first sector to be transferred. (L = 0)
In LBA mode this register specifies the LBA bits 24–27 to be transferred. (L = 1)
This indicates the retry bit. If set to one, then retries are disabled.
This indicates the number of requested sectors not transferred. This will be zero,
unless an unrecoverable error occurs.
This indicates the sector number of the last transferred sector. (L = 0) In LBA
mode this register contains the current LBA bits 0–7. (L = 1)
This indicates the cylinder number of the last transferred sector. (L = 0) In LBA
mode this register contains the current LBA bits 8–15 (Low) and bits
16–23 (High). (L = 1)
This indicates the head number of the sector to be transferred. (L = 0) In LBA
mode this register contains the current LBA bits 24–27. (L = 1)
Travelstar 32GH/30GT/20GN hard disk drive specifications
129