Bridge Surface Unit; Dual Surface Unit; Surface Units; Temperature Limiter - GE JP960 Owner's Manual

Using the surface units.
Large 9"
surface unit
setting
Small 6"
surface unit
setting
6

Dual Surface Unit

(on some models)
The right front surface unit has 2 cooking sizes to
select from so you can match the size of the unit
to the size of the cookware you are using.
To use the large (9-inch) surface unit,
turn the SELECTOR knob clockwise to
Push in and turn the control knob to the
desired setting. The unit will heat the
entire area contained by the larger circle.

Bridge Surface Unit

(on some models)
You can create an oblong heated area by using
the left rear unit in addition to the front unit
bridge combination.
Make sure the pan rests flat on the glass
cooktop.
When the select knob points to
the control knob controls both the left
front surface unit and the bridge area.

Temperature Limiter

Every radiant surface unit has a
temperature limiter.
The temperature limiter protects the
glass cooktop from getting too hot.
To use the small (6-inch) surface
unit, turn the SELECTOR knob
counterclockwise to
turn the control knob to the desired
setting. The unit will only heat the area
.
inside the smaller circle.
Choose pans that match the
circle/bridge area as closely as possible.
When the select knob points to
the control knob controls the left front
surface unit only.
,
The temperature limiter may cycle the
units off for a time if:
s
The cooktop is on while cooking.
s
The pan boils dry.
s
The pan bottom is not flat.
s
The pan is off-center.
s
There is no pan on the unit.
. Push in and
,