Honeywell HT-900 Owner's Manual page 2

READ AND SAVE THESE
IMPORTANT SAFETY
INSTRUCTIONS BEFORE
USING THIS FAN.
When using electrical
appliances, basic safety
precautions should
always be followed,
including the following:
• Use this fan only as
described in this manual.
Other use not recom-
mended may cause fire,
electric shock or injury.
• This product is intend-
ed for household, indus-
trial and commercial use
ONLY. It is not intended
for outside use.
• High Velocity fans are
designed to create rapid
air movement; therefore,
make sure the fan is not
placed near drapes, cur-
tains, or any objects that
may be drawn into the
fan inlet.
• This fan requires a
grounded 120 Volt power
source (3 prong recepta-
cles). NEVER connect the
fan to any power source
other than a 120 volt
alternating current polar-
ized outlet.
• To protect against elec-
trical shock, do not place
fan in window, immerse
unit, plug or cord in
INSTRUCTIONS F0R USE AND CARE
water or spray with liq-
uids.
• This fan is equipped
with a polarized alternat-
ing current line plug (a
plug having one blade
wider than the other).
This plug will fit into the
power outlet only one
way. This is a safety fea-
ture. If you are unable to
insert the plug fully into
the outlet, try reversing
the plug. If the plug
should still fail to fit, con-
tact an electrician to
replace the obsolete out-
let. Do not defeat the
safety purpose of the
polarized plug.
• Close supervision is
necessary when any
appliance is used by or
near children.
• Unplug the fan from the
outlet when not in use,
when moving fan from
one location to another
and before cleaning.
• Do not operate the fan
in the presence of explo-
sive and/or flammable
fumes.
• Do not place the fan or
any parts near an open
flame, cooking or other
heating appliance.
• Do not operate the fan
with a damaged cord,
plug, after a malfunction
or if dropped or damaged
in any manner.
(See warranty.)
• Avoid contact with
moving fan parts.
• To disconnect, grip the
plug and pull it from the
wall outlet. Never yank
the cord.
• The use of attachments
not recommended by
Honeywell Consumer
Products may be
hazardous.
• Always use on a dry,
level surface.
• Do not hang or mount
fan on a wall or ceiling.
• Do not operate if the
fan housing is removed
or damaged.
• Do not operate without
fan grilles properly in
place.
• A loose fit between the
AC outlet and plug may
cause overheating of the
plug. Have a qualified
electrician replace the
outlet.
WARNING: To reduce the
risk of fire or electrical
shock, do not use this
fan with any solid state
speed control device.