Assembly - Weslo Cadence R 7.2 Treadmill User Manual

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly
requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of
the packing materials until assembly is completed. Note: After shipping, there may be an oily substance on the
exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, simply wipe it off with a soft
cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver , rubber
mallet , adjustable wrench , wire cutters , and needlenose pliers .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the
key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the
quantity needed for assembly. Note: Some small parts may have been pre-assembled. To avoid damaging
parts, do not use power tools for assembly. Extra parts may be included.
1/4" Star
Washer (11)–6 1/4" Washer 5/16" Star 3/8" Star
(31)–2 Washer (5)–4 Washer (9)–4 3/8" Washer
(10)–2
1/4" Nut (4)–4 Wheel Spacer
3/8" Nut (13)–4 (83)–4
#8 x 1/2" #8 x 3/4" 1/4" x 1/2" 1/4" x 1 1/2" Bolt (3)–6
5/16" x 3/4"
Screw (12)–1 Screw (7)–6 Screw (6)–4
Screw (2)–4
3/8" x 2 1/4" Bolt (8)–6 3/8" x 2 1/2" Bolt (1)–2
1/4" x 1/2"
3/8" x 2" Bolt
5/16" x 3/4"
6