Summary of Contents for Weslo CADENCE CT 5.8 WLTL27308.1
Page 1
USER'S MANUAL Model No. WLTL27308.1 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
Apply the decal in the location shown. Note: The decals may not be shown at actual size. (Placed on the wire harness) WESLO is a registered trademark of ICON IP, Inc.
2. It is the responsibility of the owner to ensure page 13. To purchase a surge suppressor, see that all users of this treadmill are adequately your local WESLO dealer or call the telephone informed of all warnings and precautions. number on the front cover of this manual and order part number 146148, or see your local 3.
Page 4
DANGER: 20. Do not attempt to raise, lower, or move the Always unplug the power treadmill until it is properly assembled. (See cord immediately after use, before cleaning ASSEMBLY on page 6 and HOW TO FOLD the treadmill, and before performing the main- AND MOVE THE TREADMILL on page 18.) tenance and adjustment procedures de- You must be able to safely lift 45 lbs.
BEFORE YOU BEGIN Thank you for selecting the new WESLO CADENCE ing this manual, please see the front cover of this man- ® CT 5.8 treadmill. The CADENCE CT 5.8 treadmill of- ual. To help us assist you, note the product model fers a selection of features designed to make your number and serial number before contacting us.
ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
1. Make sure that the power cord is unplugged. Attach the six Base Feet (90) to the bottom of the Base (91) with six M4.2 x 19mm Tek Screws (6). 2. Attach each Wheel (92) to the Base (91) with an M10 x 80mm Bolt (4) and an M10 Nut (15).
Page 8
4. With the help of a second person, raise the Uprights (86, 87) so the Base (91) is flat on the floor as shown. Next, position the front of the Frame (61) between the Uprights. Wire See the inset drawing. Locate the wire tie in- side of the lower end of the Right Upright (87).
Page 9
6. Identify the Left Handrail Cover (80) and the Right Handrail Cover (81). Insert the end of the Hole Left Handrail (79) through the large hole in the Left Handrail Cover, and insert the end of Right Handrail (82) through the large hole in the Right Handrail Cover.
Page 10
8. Attach the Right Handrail (82) to the Console (94) with an M5 x 16mm Screw (9), an M5 Star Washer (13), and two M4.2 x 19mm Screws (5). Make sure that no wires are pinched. Start all three Screws before tightening any of them. Tighten the M5 x 16mm Screw and then tighten the M4.2 x 19mm Screws.
Page 11
10. Attach the Console (94) to the Uprights (86, 87) with six M8 x 16mm Bolts (3) and six 5/16" Star Washers (14). Start all six Bolts before tight- ening any of them. 11. With the help of a second person, lower the Side View Uprights (86, 87) as shown.
Page 12
12. Attach the Latch Housing (85) to the Left Upright (86) with two #10 x 1" Tek Screws (7). Make sure that the Latch Housing is oriented as shown. Locate the Latch Pin Assembly (84). Remove the knob from the pin. Make sure that the collar and the spring are on the pin as shown.
Grounded Outlet Box drawing 1 at the right). To purchase a surge sup- Adapter pressor, see your local WESLO dealer or call the Surge Suppressor telephone number on the front cover of this man- ual and order part number 146148, or see your local electronics store.
Page 14
CONSOLE DIAGRAM Clip FEATURES OF THE CONSOLE To turn on the power, see page 15. To use the man- ual mode, see page 15. To use a speed workout, see The treadmill console offers a selection of features page 17. designed to make your workouts more effective.
Page 15
HOW TO TURN ON THE POWER the Workout Select button repeatedly until only zeros appear in the display. IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- 3. Start the walking belt. perature before turning on the power.
Page 16
Each time the key is in- when the Speed mode is serted into the console, displayed). To change the Scan mode will be the unit of measurement, selected. The SCAN remove the key, hold mode indicator will ap- down the Stop button pear in the display, and while inserting the key a second mode indicator will show which mode is...
Page 17
HOW TO USE A SPEED WORKOUT ting by pressing the Speed buttons; however, when the next segment begins, the treadmill 1. Insert the key into the console. will automatically adjust to the speed setting for the next segment. See HOW TO TURN ON THE POWER on page 15. To stop the workout temporarily, press the Stop 2.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. Frame 1. Hold the metal frame firmly in the location shown by the arrow at the right.
Page 19
HOW TO LOWER THE TREADMILL FOR USE 1. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin. Slowly release the latch knob. Latch Latch Knob...
TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 21
Locate the Reed Switch (53) and the Magnet (51) on the left side of the Pulley (55). Turn the Pulley until 1/8 in. the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in.
EXERCISE GUIDELINES WARNING: Aerobic Exercise—If your goal is to strengthen your cardiovascular system, you must perform aerobic exer- Before beginning any cise, which is activity that requires large amounts of exercise program, consult your physician. oxygen for prolonged periods of time. For aerobic ex- This is especially important for persons over ercise, adjust the intensity of your exercise until your the age of 35 or persons with pre-existing...
PART LIST—Model No. WLTL27308.1 R0809A Key No. Qty. Description Key No. Qty. Description M10 x 110mm Bolt Reed Switch M10 x 58mm Bolt Motor Belt M8 x 16mm Bolt Drive Roller/Pulley M10 x 80mm Bolt Walking Belt M4.2 x 19mm Screw Right Foot Rail M4.2 x 19mm Tek Screw Releasable Tie...
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the CADENCE CT 5.8 WLTL27308.1 and is the answer not in the manual?
Questions and answers