Fog Lamp Control; High Beams - Ford Fusion Hybrid Owner's Manual

Lights
4. Turn the headlamp control to the autolamp position. The headlamps
will turn on.
5. Wait the desired amount of time for the exit delay you want (up to
three minutes), then turn the headlamps off.
See Message center in the Instrument Cluster section for more
information.
Fog lamp control (if equipped)
With the ignition on, the fog lamps
can be turned on when the
headlamp control is pulled toward
you and is in any of the following
positions:
• Parking lamps
• Low beams
• Autolamps (when active)
The fog lamp indicator light will
illuminate when the fog lamps have been turned on. The fog lamps will
not operate when the high beams are active.

High beams

• Push the lever toward the
instrument panel to activate.
• Pull the lever toward you to
deactivate.
78
2012 Fusion Hybrid (hfv)
Owners Guide, 1st Printing
USA (fus)