Language Settings - Pioneer DVR-5100H Operating Instructions Manual

The Initial Setup menu
DTS Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: On
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
If your AV receiver (or other connected component) has a
built-in DTS decoder, set to On, otherwise set to Off.
Check the manual that came with the connected
component if you're unsure whether it is DTS
compatible.
Important
• If you set to On with a non-DTS compatible amplifier,
noise will be output when you play a DTS disc.
• When set to On, there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when DTS Out
is Off), noise is output from the analog outputs. Do
not play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo is selected using the AUDIO button. See
Switching DVD soundtracks on page 45.
96kHz PCM Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: 96kHz
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
If your AV receiver (or other connected component) is
compatible with high sampling rate audio (88.2 / 96 kHz),
set to 96kHz, otherwise set to 96kHz
the manual that came with the connected component if
you're unsure whether it is compatible with high
sampling rate audio.
On
Off
48kHz
96kHz 48kHz
96kHz
48kHz. Check
MPEG Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting: MPEG
Initial Setup
Basic Digital Out
Tuner Dolby Digital Out
Video In/Out DTS Out
Audio In 96kHz PCM Out
Audio Out MPEG Out
Language
Recording
Playback
If your AV receiver (or other connected component) is
MPEG audio compatible, set to MPEG, otherwise set to
MPEG PCM. Check the manual that came with the
connected component if you're unsure whether it is
MPEG compatible.

Language settings

OSD Language
• Default setting: English
Initial Setup
Basic OSD Language
Tuner Audio Language
Video In/Out Subtitle Language
Audio In Auto Language
Audio Out DVD Menu Language
Language Subtitle Display
Recording
Playback
This sets the language of the on-screen menus and
displays.
Audio Language
• Default setting: English
Initial Setup
Basic OSD Language
Tuner Audio Language
Video In/Out Subtitle Language
Audio In Auto Language
Audio Out DVD Menu Language
Language Subtitle Display
Recording
Playback
This setting is your preferred audio language for DVD
discs. If the language you specify here is recorded on a
disc, the recorder automatically plays the disc in that
language (although this depends on the Auto Language
setting—see Auto Language on page 104).
PCM
MPEG
MPEG PCM
English
Français
Deutsch
Italiano
Español
English
French
German
Italian
Spanish
Other
13
103
En