Pioneer DVR-5100H Operating Instructions Manual page 36

Getting started
04
Note
• When using the simultaneous play and record
feature, the display shows information for playback
only.
• During real-time copy, the copy source playback
information is displayed.
• If Frame Search is On (see Frame Search on
page 107), the frame number is shown next to the
elapsed time display when the disc is paused.
• Transfer rate shows the amount of video and audio
information recorded on the disc. It is not an
indication of picture/audio quality.
• The Video mode disc displays become the same as a
DVD-Video disc once the disc is finalized.
• The total recording time figure shown in parenthesis
is calculated based on a 12cm/4.7GB disc at the
displayed record setting.
• Recording and playback times for TV recordings are
approximately 0.1% shorter than the actual time. This
is because of the slightly different frame rates of TV
broadcasts versus DVD.
• Copy Once or Can't Record messages may appear
in the stop or recording displays. These indicate that
the broadcast TV program contains copy control
information.
36
En